IOX-NFCREADER
For the most up to date version, please visit:
The IOX-NFCREADER integrates Near Field
Communication (NFC) with the Geotab
®
GO device to
identify drivers operating vehicles in a fleet at any given
time. Users create rules, reports, and exceptions on
MyGeotab
TM
based on individual drivers or vehicles.
Top Features
●
Simple-to-install
IOX
®
into the Geotab
®
GO device
●
Driver ID Whitelist
●
Assigns drivers to vehicles
●
Enables driver-based reporting
●
Tracks driver data across different vehicles
*IOX-NFCREADER pictured above
IOX Hardware Technical Specifications
Weight
170
g
Size
Overall Length: 1300 mm L
Widest Point (Antenna): 50 mm W × 13 mm H
Widest Point (Connector): 53 mm W × 15 mm H
Housing
Black, moisture-resistant thermoplastic overmold
Interfaces
CAN: 500 kbps (for daisy chaining)
Ground Switch: For Relay Control
Frequency
13.56 MHz
Power Output
Daisy Chaining: 2500 mA @ 12 V/24 V
Current Rating
Operating Mode: 100 mA
Sleep Mode: 1.1 mA
Temperature Rating
−40
℃
to +85
℃
Connectors
Keyed mini-USB type-B plug: Daisy chain power and CAN in
Keyed mini-USB type-B socket: Daisy chain power and CAN out
2-pin grounding socket (Molex connector)
Installation
Keyed mini-USB plug connects to the GO device or another IOX
Relay module connects to 2-pin socket
Reading Distance
With GEO-NFCSTKBLU: 19 mm
With GEO-NFCFOBBLU: 11 mm
Compatible Devices
G
O6
®
, GO7
®
, GO7 Rugged, GO8
®
, GO8 Rugged, GO9
®
Copyright © Geotab Inc. 2015-2019 - All Rights Reserved | www.geotab.com | Rev 2.13 - 11/2019
® denotes a trademark of Geotab Inc., registered in Canada, the United States and other countries
1
