Wuhan Geosun Navigation Technology Co.Ltd
Website:
Tel:+86 27 87504895
Add: 4F, Building D, Maker plaza No.8 West Maodianshan Road,
Fax:+86 27 87504895
East Lake Hi-tech Zone Wuhan City, China
Email: [email protected]
5
GS-260X Data Storage Instruction
GS-260X is used one TF SD cards, respectively
store POS, LIDAR and Image folder .
Each flight, the system will automatically create a folder named as the current time in
time, and store all the data collected in this folder directory.
Regarding the TF card, please use it according to the following terms:
[1] Please select a TF card above C10 U1 level.
[2] Approximately 5.5GB of data is generated every 10 minutes when runs LiDAR
system (in the triple echo mode). Please make sure that the remaining space in the TF
card is sufficient for next flights.
[3] When the TF card is connected to the computer, the computer system will pop up
a dialog box prompting that the storage device needs to be scanned. At this time, be
sure to select "Scan and Repair", otherwise the data in the TF card may not be read
and written normally.
GS-260X contains G64GB eMMC (The real capacity is 54 GB) Flash memory for
backing up the collected data to prevent data loss due to accidental damage of the TF
card.
If users need to read the data in eMMC Flash, please use USB type-C data cable.
(Please make sure the cable has a data transmission function. Some cables may only
have a power function. This type of cable cannot be used.) Connect the LiDAR unit to
the user's computer (the power cable does not need to be connected). The computer
will automatically recognize the TF card as a mobile storage device, and then can
perform data operations.
When each flight, it will automatically determine the remaining free space in the
eMMC flash memory. If the remaining space is less than 20GB, the system will
automatically delete the oldest data files until the remaining space is greater than
20GB.