3 of 3
GSX-LF User Manual
Flash Codes
GSX-LF Start-up Error Codes
Critical GSX-LF Error:
LED flashes repeatedly on solid for 1 second followed by off for one second.
Critical Seis Input 1 Error:
LED on solid for 1 second followed by 1 short pulse.
Critical Seis Input 2 Error:
LED on solid for 1 second followed by 2 short pulses.
Critical Seis Input 3 Error:
LED on solid for 1 second followed by 3 short pulses.
Critical Seis Input 4 Error:
LED on solid for 1 second followed by 4 short pulses.
Critical Battery Error:
LED on solid for 1 second followed by 5 short pulses.
Non-Volatile Memory Error:
LED on solid for 1 second followed by 6 short pulses.
Non-Volatile Memory Full:
LED on solid for 1 second followed by 7 short pulses.
GSX-LF Run Time Codes
GPS on but no GPS fix:
One LED flash per second.
GPS on with GPS fix:
Two quick flashes once per second.
Recording with GPS off:
One quick flash each 8 seconds.
Sleeping:
Two quick flashes each 10 seconds.
Running geophone tests:
LED flashes on for 10 ms 5 times per second.
Downloading
The GSX-LF non-volatile memory may be read and cleared by removing the battery connection
and inserting the unit into one of the outlets in the GeoReaper. See the GeoReaper User Manual
for further instruction.
Programming
The GSX-LF recording parameters such as sample rate, pre-amp gain, record mode, and testing,
are programmed and stored in non-volatile memory in the GSX-LF by the GeoReaper. See the
GeoReaper User Manual for further instruction.
