Page 9
Do not unzip the listener.zip file. Place the 2 files on a USB drive.
1. Insert a USB drive into the datalogger, to make ensure that there are no scan files on
the datalogger that have not been previously downloaded.
2. Download the firmware upgrade files to your PC.
3. Insert the USB 3.0 drive into your PC.
Transfer the firmware upgrade files onto the USB 3.0 drive, then remove the USB from your
PC.
4. Power on your
ZEB Horizon
datalogger and wait for the status LED light to pulse red.
5. Insert the USB into the datalogger. The data LED will illuminate green to show the
transfer of the firmware upgrade files.
6. Once the data LED light has switched off, remove the USB and power off the
datalogger.
7. Power on the system as normal.
8. After flashing blue, the datalogger status LED will flash red and the scanner LED will
illuminate orange during the update. Once complete the system automatically powers
off.
9. Wait 10 seconds before powering on the system again. The system should now
complete the initialisation process and have the latest firmware installed.
ZEB Horizon Generation 2 Datalogger
To update the
ZEB Horizon
2
nd
Generation Datalogger firmware the following file is required:
•
Scan_head_board_release_2_2.bin.
1. Connect the ZEB Horizon scanner to the datalogger using the main cable and power
on the system as normal.
2. Connect the datalogger to a PC as outlined in the
ZEB Horizon User Guide
.
3.
Open
->
GeoSLAM Control Tool
