Geosense TP-1, Instruction Manual

Page: 8 / 16

8
V1.0 Oct 2020
5.0 INSTALLATION
Geosense Thermistor Strings are manufactured to specific customer requirements with the
following variables: -
•
Length of cable to the first Thermistor
•
Number of Thermistors
•
Spacing between each Thermistor
THERMISTOR LOCATION
ALONG CABLE
COLOUR CODING
1 GREEN WHITE
2 BLACK RED
3 BLACK WHITE
4 BLACK GREEN
5 BLACK BLUE
6 BLACK YELLOW
7 BLACK BROWN
8 BLACK ORANGE
9 RED WHITE
10 RED GREEN
11 RED BLUE
12 RED YELLOW
13 RED BROWN
14 RED ORANGE
15 GREEN WHITE
16 GREEN BLUE
17 GREEN YELLOW
18 GREEN BROWN
19 GREEN ORANGE
20 WHITE BLUE
21 WHITE YELLOW
22 WHITE BROWN
23 WHITE ORANGE
24 BLUE YELLOW
25 BLUE BROWN
They should be installed in accordance with the specific project requirement.
It is therefore important that the correct reference is made & recorded for each sensor.
Below is the colour coding for multiple Thermistors up to a total of twenty six with
Thermistor number one being the nearest to the bare ended cable and from where readings
should be taken.