7
V1.0 Oct 2020
4.3
Inspection / functionality check readings
It is important to check all the equipment in the shipment as soon as possible after
taking delivery and well before installation is to be carried out. Check that all the
components detailed on the documents are included in the shipment. Check that the
equipment has not been physically damaged.
CHECK the Thermistor readings against the approximate environmental temperature
on arrival to ensure they have not been damaged during transportation. This is a
basic
‘
out of the box
’
functional check.
4.0
DELIVERY
This section should be read by all users of Thermistors manufactured by
Geosense
®
.
4.2
Handling
Whilst they are a robust devices, Thermistors piezometers are precision measuring
instruments. They, and their associated equipment, should always be handled with
care during transportation, storage and installation.
Once the shipment has been inspected (see below), it is recommended that
Thermistors remain in their original packaging for storage or onward transportation.
Cable should also be handled with care. Do not allow it to be damaged by sharp
edges, rocks for example, and do not exert force on the cable as this may damage
the internal conductors and could render an installation useless.
4.1
Packaging
Thermistors are packed for transportation to site. Packaging is suitably robust to
allow normal handling by transportation companies. Inappropriate handling
techniques may cause damage to the packaging and the enclosed equipment. The
packaging should be carefully inspected upon delivery and any damage MUST be
reported to both the transportation company and
Geosense
®
.
4.4
Storage
All equipment should be stored in an environment that is protected from direct
sunlight. It is recommended that cables be stored in a dry environment to prevent
moisture migrating along inside them in the event of prolonged submersion of
exposed conductors.
Storage areas should be free from rodents as they have been known to damage
connecting cables.
No other special requirements are needed for medium or long
-
term storage although
temperature limits should be considered when storing or transporting associated
components, such as readout equipment.
