20
V1.0 September 2017
lower the assemblies into the inclinometer
casing ensuring the wheels are in the
same keyways as the bottom wheel
assembly
Repeat steps 15 to 20 until all the IPI
modules are connected.
5.3 Installation with extension rods
contd
….
STEP 17
-
Connect one end of the top
wire bond to the top hanger
The top wire bond is available in pre
-
assembled lengths (1,2,3,4 etc) or can be
provided so it can be adjusted on site
STEP 18
-
Connect the other end of the
top wire bond to the top fly lead assembly.
STEP 19
-
Remove the dust caps and
align the connections of the top IPI sensor
and the top fly lead assembly
STEP 20
–
Connect both together.
Note the two red spots on each provide a
visual guide for alignment
(Continued from page 19)
(Continued on page 21)
Top hanger
Top fly lead assy
Top wire bond
