Preparing the blender
1.
Place the motor unit on a flat, stable
and level surface near a power socket
so that the power cord is not over
stretched and you have easy access to
the socket.
2.
Wash the jug, lid and measuring
stopper in warm soapy water, then rinse
and thoroughly dry with a soft cloth.
CAUTION:
The blender blades are sharp,
take care when cleaning.
3.
Wipe the motor unit with a damp cloth
and dry with a soft lint free cloth.
IMPORTANT:
Never immerse the motor
unit in water or any other liquid.
Fitting & removing the lid
1.
Slot the lid onto the top of the jug as
shown in the diagram.
2.
Twist the lid clockwise until it locks in
place with a ‘click’.
3.
Ensure that the safety lock on the back
of the lid is inserted into the top of the
jugs handle.
IMPORTANT:
The jug blender will not
operate if the lid is not correctly fitted.
To remove the lid:
Rotate anti-clockwise
and lift off using the tab at the back.
Click
5
GEORGE GJB401SS-20 Blender.indd 5
19/05/2020 11:38
Summary of Contents for GJB401SS-20
Page 12: ......
