7.
Plug the hot water dispenser into a
mains socket and turn the power on if
required.
IMPORTANT:
Close the lid and press
the stop button before plugging in.
This can make sure the hot water
dispenser will not start a boil cycle
immediately when you plug the hot
water dispenser into the socket.
8.
Press the
POWER
button on top of
the hot water dispenser to start the
boiling process.
When you press the
POWER
button
the water tank will be illuminate.
If you want to stop the boiling process
before the water has boiled, press the
STOP
button.
7
9.
After the water has boiled, the hot
water will be dispensed from the
spout into the cup.
WARNING:
The water coming out of
the spout will be very hot, handle with
care and never touch the water to
prevent scalds.
IMPORTANT:
Always leave the hot
water dispenser for 30 seconds
between two continuous water-
boiling cycles and leave for 5 minutes
between two full tanks of water
boiling.
Power button
Stop button
Summary of Contents for GHWD-22
Page 10: ...10 Notes...