George Home GHWD-22, User Manual, Page: 5 / 12

5
Important:
If you’re using the hot water dispenser for the first time, we recommend
cleaning before use by boiling and discarding the full tank of water twice. Then
simply wipe the surface down with a damp cloth.
If you accidentally boil the hot water dispenser when it’s empty, the Hot water
dispenser will switch off automatically. This hot water dispenser is protected
from overheating. If this happens, remove the plug from the mains supply and
allow the hot water dispenser to cool for 40-60 minutes before filling it with
cold water and re-boiling.
You can shut off the power whilst the hot water dispenser is boiling by pressing
the stop button.
Using you hot water
dispenser
1.
Place the hot water dispenser on
a flat, level, heat resistant surface,
within easy reach of a power socket.
2. Slot the drip tray onto the front of the
hot water dispenser.
Push the tab on the back of the drip
tray into the hole in the front of the
hot water dispenser body ( a ).
Push the drip tray down to lock in
place ( b ).
3.
Lift the lid on the top of the hot water
dispenser upwards until it is fully
open.