George Home GDM001B-22, User Manual, Page: 24 / 36

24
Use this function to set up to 3 favourite
custom programs.
1.
Press "
0/MEMORY
" once, the screen will
display 1.
2.
Press "
TIME COOK
", and use the
number keypad to enter the cooking time
you wish to use.
3.
Press "
POWER
" once to select the
desired power level, the display shows
4.
Press "
START/ +30 SEC
" to save the
setting.
To set a second and third custom program,
follow the steps above, but at step 1, press
"
0/MEMORY
" twice or three times to
display 2 or 3.
Using the function
1. Press the "
0/MEMORY
" setting once,
twice or three times to choose the
desired preset program, followed by the
"
START/ +30 SEC
" to begin cooking.
NOTE:
The microwave will remember your
desired settings; if the microwave is
unplugged or the mains power is interrupted,
please follow the steps above to reset your
desired programs.
Example: to set the following procedure as
to cook the food with 80% microwave
displays "2".
b. Press "
TIME COOK
" once, then press
"3","2","0" in order.
c. Press "
POWER
" once,"PL10" display,
d. Press "
START/ +30 SEC.
" to save the
"
START/ +30 SEC.
"twice after step c,
memory 2 and operated.
twice, screen displays "2", then press
"
START/ +30 SEC.
" to run.
MEMORY FUNCTION
the second memory, that is memory 2
e. If you want to run the saved procedure,
in waiting state, press "
0/MEMORY
"
the procedure will be saved as the
then turn back to waiting state. If you press
then press "8" and "PL8" displays.
setting. The microwave will BEEP once
power for 3 minutes and 20 seconds.
The steps are as follows:
a. In waiting state, press "
0/MEMORY
"
number keypad to input the power level
if you wish to change this (between 1-10).
"PL10" 100% as the default. Use the
twice until the screen