5
When using electrical appliances, basic safety precautions should always be followed.
ASSEMBLY INSTRUCTIONS
Unpack your George Foreman
®
BBQ Grill and check that all the parts are present
(See fig. A)
1. Before first use wash the grill plate, drip tray and lid in warm soapy water. [Wipe it
off with a damp cloth and dry thoroughly].
CAUTION: DO NOT IMMERSE THE TEMPERATURE CONTROL PROBE IN WATER
OR ANY OTHER LIQUID. TO CLEAN, WIPE WITH A DAMP CLOTH
AND DRY THOROUGHLY.
2. Assemble pedestal tube by connecting two halves of tube. Insert the tapered end
of the Upper Pedestal Tube into the top of the Lower Pedestal Tube and screw the
Tubes together.
3. Insert pedestal feet into pedestal base until they click into place. Place pedestal
base on a flat, level surface.
4. Insert slotted end of assembled pedestal tube into center hole of pedestal base
and push down firmly.
5. Place grill base on top of pedestal tube assembly, ensuring hole in center of grill
base engages with tube.
6. Align until the notch on the bottom of the grill plate with the slot in the upper
pedestal tube. Attach clip from upper pedestal tube to grill base.
7. Place drip tray securely into position inside grill base.
8. Position probe receptacle through probe cutout in top side of grill base.
9. Attach lid handle to lid from the inside using a screwdriver and included screws.
10. Place lid over grill. Your grill is now ready to use!
GRILLING OUTDOORS
• Ensure the temperature control probe socket on the BBQ grill is completely dry.
• Insert the temperature control probe into the probe socket on the BBQ grill.
NOTE: This BBQ grill must only be used with the temperature control provided.
Do not use any other probe or connector.
• Turn temperature control probe to the 0 position and attach securely into the
probe receptacle.
• Plug into power outlet. Align desired temperature setting with the indicator light.
Place lid securely on grill. Allow BBQ grill to pre-heat to desired temperature for
approximately 10 minutes. See COOKING CHARTS for more details.