George Foreman GFJE2200AU, Instructions Manual

Page: 5 / 12

5
HOW TO USE
Remove all labels, tags and stickers attached to the body or cord.
Important: Before you use it for the first time, disassemble the unit (see HOW TO
DISASSEMBLE section); wash all parts as instructed in the CARE AND CLEANING
section.
HOW TO ASSEMBLE AND USE
1. Place the pulp separator on the base with the juice spout facing
you.
2. Insert the cutter/strainer in the centre of the pulp separator. Press
it down until it snaps into place.
3. Grip the pulp container and slide it in until it snaps into place.
Important: Do not operate juice extractor without pulp container
in place.
4. Place the cover on top of the pulp separator with feeder in place.
5. Lock the locking latches by pressing down the cover as you fit the
tab at the top of each latch into the groove on each side of the
cover. Press the bottom of each latch until you hear it click into
place.
Important: The unit will not operate until the locking latches are
locked.
6. Place the juice cup under the juice spout.
7. Cut food into pieces to fit the food chute.
8. Plug unit into electrical outlet. Press the on/off (I/0) switch to the
on position.
9. Place food in the food chute and press lightly with the feeder.
10. Every time the pulp container is almost full, turn the unit off (0)
and unplug from outlet, empty the pulp container and clean the
cutter/strainer before you start juicing again.
Caution: The cutter/strainer teeth are very sharp. Handle carefully.
11. When juicing is completed, turn the unit off (0) and unplug from
outlet.