17
8
Attaching LP Gas Cylinder
The LP-gas supply cylinder to be used must be constructed and marked in
accordance with the Specifications for LP-gas Cylinders of the US Department
of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339,
Cylinders, Spheres, and Tubes for the Transportation of dangerous Goods; and
Commission. Only Cylinders with a listed overfilling prevention device (OPD) will
have valve handles with three "lobes" (prongs). Only use 20-pound cylinders
equipped with a cylinder connection device compatible with the connection for
out door cooking appliances. The cylinder must include a collar to protect the
cylinder valve. Blue gas cylinder should not be dropped or handled roughly! If
the appliance is not in use, the gas cylinder must be disconnected. Storage of
an appliance indoors is permissible only if the cylinder is disconnected and
removed from the appliance. Cylinders must not be stored in a building, garage,
or and enclosed area. Your cylinder must never be stored where temperatures
can reach over 125˚F! Before connecting, be sure that there is no debris caught
in the head of the gas cylinder, head of the regulator valve, or in the head of the
burner and burner ports. Connect regulator valve and hand–tighten firmly.
Disconnect the propane cylinder from the regulator valve when the grill is not
in use. DO NOT obstruct the flow of combustion air and ventilation air to the
grill.
Leak Test
Safety Precautions:
•
Test all gas connections for leaks before using your propane grill.
•
Test for leaks every time you connect the gas supply.
•
Do not smoke while checking for leaks.
•
DANGER - Do not use an open flame to check for gas leaks. Be sure there
are no sparks or open flames in the area while you check for leaks. This
will result in a fire or explosion which can cause serious bodily injury or
death, and damage to property.
•
Test for leaks outdoors in a well ventilated area.
1.
Mix a couple tablespoons of liquid detergent with an equal amount of
water. Use mild soap and water. DO NOT USE HOUSEHOLD CLEANING
AGENTS.
2.
Be sure that all the Burner Control Knobs are in the OFF position and the
gas cylinder is open.
3.
Use a clean paint brush to brush soapy solution onto connection between
gas cylinder and Regulator orifice, and watch for bubbles.
4.
If bubbles form or if a bubble grows, there is a leak. Retighten connection
and repeat steps (2) and (3).
NOTE:
If you cannot stop a leak, remove gas cylinder and check for damaged
threads, dirt and debris at the connection and gas cylinder. Also check to see if
anything is obstructing flow of gas at the connection and gas cylinder open-
ings. Remove any obstruction that may be found and repeat leak test.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
Base Panel (P/N 22494)
2.
Lockable Caster (2) (P/N 22495)
3.
Wheel (2) (P/N 22496)
4.
Wheel Spacer (2) (P/N 22497)
5.
Lower Frame Support (P/N 22498)
6.
Upper Frame Support (P/N 22499)
7.
Door, Left (P/N 22500L)
8.
Door, Right (P/N 22500R)
9.
Tank Clamp Bracket (P/N 22501)
10. Tank Support Bracket (P/N 22502)
11. Side Shelf, Left (P/N 22503)
12. Side Shelf w/Burner, Right
(P/N 22504)
13. Lid and Grill Assembly
(P/N 22505)
14. Heat Plate (2) (P/N 22506)
15. Cooking Grid (2) (P/N 22507)
16. Drip Pan (P/N 22508)
Parts List
GR-GBQ440_IB_1-4-04 4/1/04 3:28 PM Page 15