3.4.2 Response time
The response time function varies the rate at which
the output functions adjust to changes in the input
signal. For example, if the response time is set at
10 seconds, the current output will take ten
seconds to reflect 95% of any change in flow
signal input .
Use the response time to reduce the effects of
turbulence and steady/periodic noise in the flow.
The standard flow deviation display (sec. 3.5.2)
will help evaluate the need for increased response
time. The options available are Instantaneous, 5,
10, 15, 20, 30, 40, 60, or 80 seconds.
To change the response time setting, first enter the
access code (section 3.2.1) then press the down
arrow until the display shows:
Step:
Press:
To display:
ENTER
The factory default setting
for response is 10 seconds.
Up arrow changes the
setting.
The enter key stores the new
setting and returns the display
to the main menu.
15
1.
4.
2.
3.
ENTER
Arrow
keys advance to another menu function;
run/edit
key returns to normal operation.
Example illustrates setting
response at 20 seconds.
Summary of Contents for +GF+ SIGNET 2550
Page 1: ...GEORGE FISCHER GF GF SIGNET 2550 Insertion Magmeter Instruction Manual...
Page 34: ...NOTES...
Page 35: ......
