25
EM61LX2 Data Logging System (DAS70-AR2)
6. Display Options
After the
Display Options
button was tapped (or executed from the keyboard) in the Main Screen the
Display Options dialog window appears on the screen. This dialog allows you to enable and disable
the display of each channel profile, specify color and thickness of profiles, and select channel to be
used in modulated ribbon display and alarm monitoring. Please note that profile attributes (colour
and line thickness are common for Left and Right sensors). Therefore, for example Early channel
will be always shown with the same colour regardless of the sensor. The dialog is presented below.
Description of Options and Parameters:
Color
To change colour of each profile tap the coresponding button (with colour line) labeled
Color. The standard dialog titled Color will appear.
Select desired colour by tapping on a colour box (the selected colour box will be highlighted).
Tap the button
OK
or press
ENTER
key to accept the highlighted colour. The Color dialog
will disappear and the colour of the appropriate channel button will updated. To cancel
colour selection tap
Cancel
(X) button or press
Esc
key.
Thickness
Specify thickness of a profile for a desired channel by using one of four drop-down boxes
labeled thickness. Thickness of a profile curve is expressed in pixels. Available settings are:
1, 2, 3, or 4 pixels.
Tapping on the down arrow next to the text box (labeled by number of pixels) opens a
drop-down box showing available selection (see Figure below). Select thickness by tapping
on the desired selection. If keyboard is used activate text box by pressing TAB key (till the
box is highlighted) and then by using up or down arrow keys select one of available items.