Reference
Version number
Application date
KEYMAZE 500HIKE
1
17/11/2011
9/24
KEYMAZE 700TRAIL
g/ Pairing the heart rate monitor belt
(KEYMAZE 700 only)
To detect the signal from the belt, it must be fitted to the chest with the sensors moistened. If after
several attempts the belt cannot be recognised, try pairing using this mode.
Each sensor (accelerometer or heart rate monitor belt) has a unique identification number that cannot
be changed. When the belt is stimulated (moisten then fit to the chest) it automatically transmits its
identification number to the watch.
The "Pairing" function enables the KEYMAZE to detect the stimulated belts that are within a 10-metre
radius and memorise their identification number. You must move away from any other sensors in the
vicinity during this phase to prevent your belt from pairing with them.
By default the KEYMAZE 700 is supplied paired the HR monitor belt contained in the package. It is
therefore not necessary to use the "pairing" function before using it for the 1st time.
However, the "pairing" function may be used when you wish to use another belt or when the belt can
no longer be recognised.
h/ Updating the KEYMAZE
This mode updates your KEYMAZE using the Geonaute Software interface allowing you to benefit from
the latest improvements.
To do this, you need to be connected to your PC using the cable provided and the Geonaute Software
application must be active.
