Operation
Zoom80
| 79
Aim360/
Track360
The Aim360 sensor permits automatic angle and distance measurements to
prisms. The prism is sighted with the optical sight. After initiating a distance
measurement, the instrument sights the prism centre automatically. Vertical
and horizontal angles and the distance are measured to the centre of the
prism. The Track360 mode enables the instrument to follow a moving prism.
As with all other instrument errors, the collimation error of the automatic
aiming must be redetermined periodically. Refer to "4 Check & Adjust" about
checking and adjusting instruments.
When a measurement is triggered while the prism is still moving, distance and
angle measurements may not be made for the same position and coordinates
may vary.
If the prism location is changed too quickly, the target may be lost. Make sure
that the speed does not exceed the figure given in the technical data.
