☞
The tilt initialisation icon shown on the right appears when the tilt
compensation is activated, but not yet initialised to have high accur-
acy. Measurements cannot be taken yet.
☞
If IMU does not work, the icon shown on the right side is displayed.
This behaviour occurs in rare cases.
5.
To initialise tilt compensation, move the antenna around by walking or shake the
antenna back and forth.
☞
During the initialisation process, the icon shown on the right may
appear. This icon indicates that tilt is being initialised.
☞
Once the tilt compensation is initialised and good GNSS accuracy has
been met, the icon shown on the right appears. This icon shows
the current amount of tilt and means measurements can now be per-
formed.
6.
There is a possibility to perform a user calibration. To do so, press the tilt icon and
select Calibrate. This calibration is optional and needs to be performed only if the
setup has been changed. For example, a different pole is used.
7.
Press Measure or Meas. & Store to measure points.
8.
Use 3D view for a 3D overview of the current position in GNSS survey.
27
Operation
Summary of Contents for Zenith60 Series
Page 1: ...English Version 1 1 User Manual GeoMax Zenith60 Series...
Page 37: ......
