GeoMax Zenith60 Series, User Manual

Page: 25 / 38

Inserting a SIM card
1b 1b 1b
1a 1a 1a
33
22
44
25198_001
☞
Inserting/removing the SIM card while the Zenith60 is turned on can result in per-
manent damage to the card. Only insert/remove the SIM card when the Zenith60 is
switched off.
☞
The SIM card is inserted into a slot inside battery compartment A.
1. Open battery compartment A.
2. Remove the battery.
3. Remove the cover marked with SIM.
4. Insert the SIM card with the connectors facing downwards and lock it into position.
4.4 Working with the Tilt Compensation
Tilt compensated measurements are possible only with Zenith60 LTE
‑
UHF
‑
IMU GNSS smart
antenna and Zenith60 LTE
‑
IMU GNSS smart antenna. This option is supported only in field soft-
ware (for example X-PAD).
Points can be measured with a tilted pole while holding the pole tip over the point. That elimin-
ates the need to check whether the circular bubble on the pole is levelled.
Measurements performed with a tilted pole are reliable and accurate. The Inertial Measurement
Unit (IMU) measures and defines the amount and the orientation of the tilt.
Measurements are immune to magnetic interferences due to the IMU implemented in the sensor.
To be able to perform measurements with a tilted pole, it is required to have a fixed RTK
solution.
When measuring points with a tilted pole, initialise the IMU. The IMU or tilt compensation can be
initialised by moving the sensor around. Initialisation status is indicated in X-PAD field software.
Move the sensor to maintain the initialisation, for example moving to the next point to be
measured.
Description
25 Operation