ARMORED CABLE SPLICE KIT. MODELS 4500-9-HDF1 AND 4500-9-HDF2
| MAKING THE SPLICE |
11
2.4
ASSEMBLE THE REMOVABLE END CAP
1.
Ensure the grommet is firmly and snugly in place on the adapter connector.
2.
Slide the fitting nut over the grommet and screw it onto the adapter
connector.
Note:
Make sure the cable doesn’t move during this step.
Note:
Do not connect the assembled removable end cap to the tube until
you have finished filling the tube with encapsulant. Refer to Section 3 for
more information.
When all the connections are complete, use the supplied CK200 encapsulant to
protect the splice, as instructed in Section 3.
