GeoCue True View 410, Hardware User'S Manual, Page: 8 / 40

True View 410 Hardware User Guide
8 True View 410 Hardware User Guide 8/3/2020
3. Apply Loctite to the 4 Set Screws and install in the empty screw spaces from Step 2 using a
1.5mm hex driver (Figure 7). WARNING - Do not overtighten. If screws are too tight, they will
press into the plastic plate below and could cause the plate to crack.
Figure 7
4. Install the four 50mm spacers on top of the set screws (Figure 8).
Figure 8
5. Line the plate up on top of the spacers. Apply Loctite to the 4 screws removed in Step 2 (Figure
9) and secure the plate to the top of the spacers (Figure 10).
Figure 9