Page 14/48
© Geobrugg AG, CH-8590 Romanshorn, Switzerland
GBE-100A-R / 08
5
STAKE-OUT GEOMETRY
GENERAL PRINCIPLES FOR THE STAKE-OUT GEOMETRY
Standard stake-out dimensions
If the installation complies with the standard stake-out dimensions and their tolerances shown over the next few
pages, the structure can be installed easily and all components will function perfectly during a rockfall event.
Adapting to the terrain
Depending on the terrain, it may not be possible to follow standard stake-out procedure. Making lots of small ad-
aptations to the cross-section or lengths of nets, ropes, posts, and so on is sufficient to guarantee that the struc-
ture will function perfectly even in such cases.
If Geobrugg is informed of the variations, a suitable solution can be found together quickly.
1)
Rope anchor
Lateral anchor
2)
Change in alignment downslope
Downslope anchor
3)
Intermediate Anchor
with support rope
separation
4)
Change in alignment upslope
Upslope anchor
5)
Intermediate anchor
without support rope
separation
1)
5)
3)
4)
2)
Summary of Contents for GBE-100A-R
