Page 18/41
© Geobrugg AG, CH-8590 Romanshorn, Switzerland
GBE-1000A / 16
6
ROPE ANCHOR - PLACEMENT
The post angle is dependent on the terrain slope, see table 4.
For a slope inclination with
< 30° und
> 45° small adjustments may be made with respect to the
stakeout such as length of the retaining ropes, angle between retaining rope and post inclination of the
ground plate, etc.
Depending on the terrain conditions but in any case, if terrain slope angle
> 45° it is recommended to
use bavettes (additional mesh between the terrain and bottom part of the mesh).
The anchor holes are drilled in the pulling direction, with a minimum angle of > 15° to the horizontal.
ß
Ω
0°-30°
15°
32°
17°
34°
19°
36°
21°
38°
23°
40°
25°
42°
27°
44°
29°
45°
30°
:
The angle must be between 60° - 85°.
:
The angle between slope and post is 75°
as standard.
Tab. 4
Summary of Contents for GBE-1000A
