G804 User Guide Document: G804-3
-----------------------------------------------------------------------------------------------------------------------------------------------
-
61
11.4. Discrete content displayed in each projector
User can configure to show independent content in each projector. Below are the guidelines:
Signal source selection: only one HDMI input source can be selected as discrete display input
source in one processing module. User can only select two HDMI input sourced for four discrete
displays.
When execute discrete display, please reset [Video Wall] and Edge Blend] to default value.
User need to use geometry alignment to let the images in projectors apart from each other.
If necessary, user can use [Overlap] function under [Video Wall] to adjust image aspect ratio. This
function can also let the image in overlap area apart from each other without change geometry
alignment. However, Video Wall [Zoom] setting and [Edge Blend] setting shall be reset to default.
In this case, the maximum source resolution should be under 4k/2k @30Hz.
11.5. Complete system aspect ratio adjustment
User can change the aspect ratio of the image with black borders or to stretch the image in specific
direction to compensate the aspect ratio difference between video wall and the content. The
Maximum adjustment range is 1800 pixels in each edge. User can adjust [Overlap] value under
[Video Wall] menu to change the cropping area and achieve aspect ratio change.
