G-105 User Manual Document: G-105-01
------------------------------------------------------------------------------------------------------------------------------------------------
44
projector auto adjustment function. In this case, user can disable projector auto alignment or to set
longer Logo Time Out so that GeoBox will not execute geometry adjustment before projector finishes
auto alignment. A good match in the system power ON procedure and Logo time out will maintain the
image position while user powers ON/OFF the complete system.
14.4.4 [Standby Time Out]
This function is to Power ON/OFF complete system through signal source.
11.5 [Setting]
11.5.1 Frame Lock and Free Run Mode
[Frame Lock] will ensure the input and output frame rate synchronize together. This is mainly for
multiple G-105 applications. If [Flame Lock] is disabled, the system will be in [Free Run] mode and
keeps continuous output timing. This will provide quicker input source or input timing change under
below conditions:
Five sub-menu under [Setting] menu:
[Mute] Audio mute or enable
[Frame Lock]: system synchronization
[Box ID]: Set control ID
[Profile]: Save profile settings
[Network]: set RS232 and network control
If it is set to “60”, GeoBox will
automatically cut off output signal when
no input signal is detected for 60
seconds.
If the display device can also
automatically shut down when no input
signal is detected.
User can control signal source to turn
ON/OFF the system.
