Geo BJ 120, Operation And Maintenance Manual, Page: 20 / 39

20
During the following steps 5 and 8 , be
sure the sickle bar is installed in the
upright position as shown in figure 18
(“protruding slightly"). The angle can be
adjusted via the lever arm using the taper
socket. If it doesn’t fit straight away it may
need to be
readjusted with the taper
socket.
Fig. 17 Hydraulic cylinder attached
Fig. 18 Information: note the angle
Fig. 16 Sequence 1-6 (retighten 3x!)
1
2
3
4 5
6
Groove