background image

10

 

Optima 310

Factory setting:

Date:

Date:

Date:

1

0

2  

21

3

0

4

0

5  

52

6

0

7

50

8

0

9

0

10

5

11

0

12

-10

13

50

14

3

15

0

16

30

17

0

18

5

19

0

20

5

21

40

22

70

23

100

24

35

25

55

26

70

27

0

28

1

29

0

30

0

31

1

32

1

33

0

34

0

35

0

36

0

37

0

38

0

39

0

40

0

41

0

42

0

43

-3

44

0

45

20

46

3

47

0

48

0

49

70

50

5

51

0,4

52

0

1.7 Factory default scheme

1.6 Special functions

Summertime:

Changing the clock between summer- and wintertime is 
done by simultaneously pressing “Enter” together with 
“Arrow Up” or “Arrow Down”. This will change the clock 
hour by 1 hour in the desired direction.

Contrast adjustment:

Contrast of the display can be changed by pressing the 
“Info” button while the program info screen is displayed. 
Use the arrows to adjust up or down. You can also enter 
menu 44, press OK and then hold the info button until the 
display reads “contrast adjust”, and adjust the contrast 
with “arrow up/arrow down” button. After 4 seconds the 
contrast adjusting menu is closed.

Program sub-version number:

Pressing “Arrow Up” when the program info screen is 
displayed will also show sub-version of the controller. Or 
it is possible to enter through the menu 44, press ok and 
then “arrow up”

Summary of Contents for Combi 185

















Reviews: