SOFTWARE DOWNLOAD PROCEDURE
Downloading Update Software to a SD card (if already completed skip to Reflash procedure)
1. Insert a new blank 512 MB (minimum) to 16 GB (maximum) SD card into the SD card slot of a computer with
internet access. Make sure the SD card is in the “unlocked” position.
NOTE:
DO NOT use the customer’s MAP SD card to update the system.
2. Go to “Start” and select “Computer,” then double-click on the SD card “removable disk”.
3. Delete any existing files.
4. Confirm that no files are left on the SD card.
5. Log on to MS3 and select “IDS/Infotainment.”
6. Select “TomTom Updates.”
7. Select “Click Here” to read the TomTom - End-User License Agreement (EULA).
8. After reading the TomTom - EULA, select “I AGREE” to gain access to the update file.
9. Save the “10.851.1441501_ECR9.5.1-CAB-Fuji.cab” to the desktop, then double click to open.
10. Copy the two update files to the SD card
11. Right click the two files and select “Properties” to make sure the files are “Read Only.” If not, check the box
to make the file “Read Only” and then select “OK.”
NOTE:
The files are made “Read Only” so that the system will not erase the files off the SD card during the
update process. You can then continue to use this SD card to update other vehicles.
12. Remove the update SD card from the computer.
NOTE:
The update files can also be copied to other SD cards.
