manualshive.com logo in svg

GENUINE Buddy 125, User Manual, Page: 44 / 44

Share
Download
GENUINE Buddy 125 User Manual Download Page 44

44

 

PART NO. C1352170000

                         Genuine Scooter Company

                         5400 N Damen Avenue

                         Chicago IL 60625

Reporting Safety Defects

If you believe your vehicle has a defect that could cause an accident, or could cause injury

or death, you should immediately inform the National Highway Safety Administration 

(NHTSA) in addition to notifying Genuine Scooter Company.

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a 

safety defect exists in a group of vehicles, it may order a recall and remedy campaign

However, NHTSA cannot become involved in any individual problems between you, 

your dealer, or Genuine Scooter Company.

To contact NHTSA you may either call Auto Safety Hotline toll-free at 1-800-424-9393 

(366-0123 in Washington DC area) or write to:

     NHTSA

     U.S.DEPARTMENT of TRANSPORTATION

     400 7th Street SW , (NSA-11)

     Washington ,DC 20590

You can also obtain other information about motor vehicle safety from the Hotline.

Summary of Contents for Buddy 125













































Reviews:

No comments