GENUINE Blur 150, Service Manual

Page: 80 / 186

E.Check crankshaft
1.Measure the difference of the connecting
rod big end between the X and Y
2.
Measure the swing ness of the crankshaft
journal.
Limit of use
A B
Change it when above
0.1mm
Change it when above
0.1mm
3.Check the looseness of crankshaft bearing.
If it is loosen, replace to a new one.
F.Assemble crankcase:
1.assemble crankcase according to the opposite procedure of disassembling.
2.The locking torque of bolts and nuts are described in previous chapter please refer.
Limit of use : replace it when above 0.04mm.
A
B