Disassembly manual for GT Home awnings
GT HOME VAN | GT HOME 310 | GT HOME 410
4
Close all zippers at the front of the
tent except for the ones on the left and
right side.
2
Open the zipper of the car-con-
nection that attach the awning to the
vehicle.
5
Release the cross strut on the interior. Open the valves and squeeze air out of the
tubes, starting at the top and working towards the valves, 1-2x until all air has escaped.
When the tubes are empty, close the valves again.
NOTE:
The same applies for the additional air tube in the front of the GT Home 410.
3
Close rolled up curtains at the win-
dows and ventilation openings on the
in- and outside.
6
Finally, open both valves of the awning’s
main tubes (at one broadside on the in- &
outside) and let the tent collapse.
TIP:
If you have the time, leave the awning
for 15 minutes, so some air is squeezed out
by the tent’s own weight.
Page 1 of 3
Thank you for choosing one of our GentleTent awnings! It takes a bit of practice and a
suitable guide to fold it up to its initial packing size. Follow the following guide step by step!
We hope you have a good “Coming Home” with your GentleTent awning.
1
4
2
5
5
3
6
6
Preparation
1
Release the guy lines you used to fix
the tent to the ground and, depending
on wind conditions, pull out the ground
pegs.
TIP:
During stronger winds leave the
4-6 ground pegs that hold down the
tent for the time being.
