14
1
7
6
2
3
4
5
EN
Rev. 01 - 05/2013 - Cod. CM31710 -
Instruction manual
Compressor Mod. C330
22. RESIDUAL RISKS
Although the Manufacturer has adopted all technical construction solutions in order to make the appliance as safe as
possible, authorised operators please be aware that residual risks remain.
23. AREAS ASSUMED BY AUTHORISED OPERATORS
24. COMMAND DEVICES
The command devices are:
1
Electrical supply cable
2
Pressure switch
3
“ON-OFF” switch
4
Outlet pressure regulator
5
Air outlet spigot
6
Tank pressure gauge
7
Tank outlet gauge
AREA A:
on the rear side of the appliance
next to the command devices , in order
to command the activation and deac-
tivation of the compressor, to carry out
connection/disconnection of the utensils,
reading of the gauge and the regulation
of the pressure, cleaning or replacement
of the air ilter and opening/closure of the
condensate pump.
AREA B:
when working to carry out suita-
ble operation dependent on the type of
utensil used (E.g. veneering, etc.).
RESIDUAL RISK
Danger of burns upon accidental contact with the twin cylinder pump system
and the electric motor.
SEVERITY OF DAMAGE
Mild damage (normally reversible).
LIABILITY
Liability may be incorporated in the instance when the operator decides to
voluntarily carry out an incorrect or forbidden action.
PROBABILITY
Small and accidental.
PHASE IN WHICH THE
RISK IS PRESENT
Operation.
SUITABLE PROVISIONS
Safety signs (see Paragraph 20).
Commitment to use personal protection equipment (PPI) (see Paragraph 21)
and/or waiting for the appliance to cool.
