Programming
and
Information
Guide
Information on compatible products and video programming instructions are available at
www.homelink.com
Only press the transmitter button on the integrated garage door opener if there are no
persons or objects present within the sweep of the garage door. People could otherwise be
injured by the movement of the door.
1
2
3
4
Integrated garage door opener on the rear-view mi
of this integrated garage door opener.
rror Garage door remote control 5 is not part
atteries in garage door remote control 5 before
programming.
e programming, clear all HomeLink memory by following the instructions in the
"clearing memory" section (page 333)
the ignition lock.
ed garage door opener. Indicator lamp
1 lights up yellow.
ntrol 5 towards buttons 2 to 4 on the rear-view mirror at a distance of 2 to 8
inches (5 to 20 cm).
tton 6 on remote control 5 until indicator lamp 1 lights up green. If the
indicator lamp 1 does not turn green, reposition the remote control 5 and repeat this step.
To achieve the best result, insert new b
•
►
For first tim
•
►
Turn the SmartKey to position 2 in
•
►
Press and release one of buttons 2 to 4 on the integrat
•
►
Point remote co
•
►
Press and hold bu
HomeLink
and
the
HomeLink
house
are
registered
trademarks
of
Gentex
Corporation.
