Gentec TFT8000 Installation Manual Download Page 16

16

MAR-IM-FLOT01-MB-041219

[email protected]

www.gentecaustralia.com.au

P: +612 9319 4422 

F: +612 8088 7635

Unit 6 20-28 Ricketty St,

Mascot, Sydney, NSW 2020

the Principal in relation to specific Goods.

4.5 However, nothing in this clause will prevent 
You from exercising any rights which You may 
have under the Competition and Consumer Act 
2010 or any other law which cannot by law be 
excluded or modified by agreement.

5. Notices

5.1 Any notice in connection with this
document must be given in writing.

5.2 Any notice in connection with this
document is taken to be received:

5.2.1  if hand-delivered, on delivery;

5.2.2 if faxed, at the local time (in a place 
of receipt of that fax) which then equates 
to the then time at which the fax is sent as 
shown on the transmission report which is 
produced by the machine from which that 
fax is sent and which confirms transmission 
of that fax in its entirety unless that local 
time is not a Business Day, or is after 5pm 
on a Business Day, in which case that 
communication will be deemed to have 
been received at 9am on the next Business 
Day;

5.2.3 if emailed, at the local time (in a place 
of receipt of that email) which then equates 
to the then time at which the email is sent 
as shown on the transmission report which 
is produced by the computer from which 
that email is sent and which confirms 
transmission of that email in its entirety 
unless that local time is not a Business Day, 
or is after 5 pm on a Business Day, in which 
case that communication will be deemed 
to have been received at 9 am on the next 
Business Day; and

5.2.4 if posted, seven (7) days after being 
placed in the post; unless a later date is 
specified in it, and takes effect on the

 

date 

it is taken to be received. 

5.3 The address for any notice to be 
delivered to the Principal is as follows:

Summary of Contents for TFT8000

















Reviews: