11
www.gentecaustralia.com.au
1.
Remove the head valve using a shifter
on the flats and remove the cartridge.
(Figure 1)
2. Undo the stopper (10)
3. Set aside the crown ring (8)
4. Set aside the head valve (5) from the
stem
5. Remove the washer Gaco (6) from the
head valve (5) and replace with the new
washer gaco (6)
6. Remove the Gaco (11) from the stopper
(10) and replace it with the new washer
gaco (11)
7. Remove the “O” Ring (9) and replace it
with the new “0” Ring (9)
8. Remove the “o” Ring (7) and replace it with
the new “o” Ring (7)
9. Using the existing crown ring (8) place it
back into the head valve (5)
10. Place the stem (4) through the head valve
(5)
11. Apply a drop of Loxeal to the thread of the
stem (4)
12. Replace the stopper (10), ensure the “o”
Ring (9) is in place, then tighten the stop-
per (10). Do not overtighten.
13. Fit the cartridge and handle back into the
body, and tighten. Do not overtighten.
Important Information
The damage on parts after
dismantling a product would not be
covered by the warranty.
*Regular service must be carried out on the product to avoid product failure.
Figure1
