11
www.gentecaustralia.com.au
Service inspections at regular intervals especially in high usage areas will assist in
optimising the operational life of the product.
1.
Flush the new pipe prior to installation
2. Drill a 35mm hole on the counter top
ELECTRONIC BASIN TAPS
PLUS1000BM
Mounting Instructions
3. Place the Flange, and insert the sensor
cable followed by the flexi hose through
the tap hole in the counter top.
4. From underneath the sink or basin, fix
rubber seal, fixing plate and fixing nut with
a spanner. Make sure the screws are well
tightened to the counter top.
5. Plug in sensor to solenoid box (See page 8
for complete installation of Solenoid).
Mounting
Nut
Washer
Important Information
•
Switch power on
solenoid box first and
test electronics before
turning on water supply
