Beamage-M² User Manual
Revision 6
29
Figure 5-27:
Calculate M²
button
5.3.4. Manual Frames
In case you wish to add points at specific beam path lengths, write the distance (in millimeters) at which the
data must be taken and click the
Add
button. This can be done several times if needed. The arrow buttons
allow you to go quickly at one end or the other of the moving stage. These are useful when aligning the
laser.
You can find more details about manual measurements in section
Figure 5-28
: Manual distance setting
5.3.5. Data
The
Data
box allows visualization and manipulation of the data.
Figure 5-29:
Data Box
