Genovation
Page 12 of 45
midipc
To Send the Bank and Patch Values
While in Manual Mode, pressing Enter at any time causes all of the displayed
(enabled) data to be transmitted.
Scrolling through Patches
With the cursor flashing on the Patch value, pressing an Up or Down arrow key
causes the displayed patch value to be incremented or decremented by one, and
the new displayed (enabled) data to be transmitted.
If the Patch value overflows or underflows, then the Bank Value (if enabled), is
modified by one also. This allows you to scroll seamlessly over bank boundaries
in both the forward or reverse direction.
Using the Arrow Key on a Bank Select
To quickly change to the next or previous bank, put one of the Bank Select value
in edit mode and press the desired Up or Down arrow key. This will cause the
Bank Select value to change by one, followed by transmission of enabled data.
