All artwork and images copyright
GEN
LED
®
AgiLight Industries Inc.
Use or reprinting prohibited unless explicitly approved by
GEN
LED
®
AgiLight Industries.
Page 7
GEN
LED
AgiLight
®
is a quality division of
GEN
LED Brands
™
| www.
GEN
LEDBrands.com/Home/AgiLight |
GEN
LED
AgiLight
®
| Innovative Signage Lighting
F I E L D C U T T I N G A N D S O L D E R I N G
4. Strip small amount off end of the 2 core wire
6. Place the tip of one wire on top of the pre-tinned
copper pad and then place the soldering iron point
on top to attach the wire onto the copper pad. The
max solder time per pad is 10 seconds. Repeat
the same steps for the other wire and copper pad to
complete the installation.
5. Pre-tin the wires by placing the soldering iron
point onto the tip of one wire and applying solder
on it. Repeat the same steps for the other wire.
(soldering iron)
(soldering iron)
(wire stripper)
(2 core wire)
(2 core wire)
(2 core wire)
(solder)
