8
9. RUNNING BELT ADJUSTMENT
(1) Running belt deviate to left
Start the machine by speed at 2-3Km/h without loading, use die nut to make the screw go 1/4
circle(see fig1). Then make the machine running without loading 1-2 minutes. Please adjust like this to
make the belt till to mid place.
(2) Running belt deviate to right
Start the machine by speed at 2-3Km/h without loading, use die nut to make the screw go 1/4
circle(see fig2). Then make the machine running without loading 1-2 minutes. Please adjust like this to
make the belt till to mid place.
(3) Running belt logjam
If the running belt is in dead condition, use die nut to make the screw 1/2 circle both left and right
till this logjam solved.
10
. DAILY MAINTAINANCE
1. Please disconnect power before checking the machine or cleaning.
2. Clear belt and dial plate after use, at least once a week.
3. Check and tighten screws and spines at fixing point.
4. Do not hang clothes or other objects on the machine.
Summary of Contents for KBR-JK370A
Page 11: ...11...
