PAGE 1
C O N T E N T S
RAPID FIRE
Turning on/off rapid fire is very easy to do. This controller is
capable of rapid fire on both the right trigger and the left trigger.
To turn on/off rapid fire on the right trigger, first hold the right
trigger in all the way. Then, tap the sync button while still holding
the right trigger in. You will see the Player 4 LED blink to indicate
that rapid fire on the right trigger has been enabled. To turn rapid
fire off, repeat the process used to turn it on. To turn on rapid fire
on the left trigger, follow the same steps except hold the left
trigger instead of the right trigger. When left trigger rapid fire is
enabled, you will see the Player 3 LED light remain lit.
BURST FIRE
When rapid fire is enabled (the Player 4 LED is flashing), you can
switch to burst fire. To do so, hold the right thumbstick to the
RIGHT, and tap the sync button. The Player 4 LED will remain solid
to indicate burst fire is enabled. To switch back to rapid fire, hold
the right thumbstick to the LEFT. The Player 4 LED will flash to
indicate raid fire is enabled.
PAGE 1:
Rapid Fire, Dual Rapid Fire, and Burst Fire
PAGE 2:
How to Change Modes
PAGE 3:
Programming the Rapid Fire
PAGE 4:
Programming the Rapid Fire Cont.
PAGE 5:
2012 – 2012 Selection
