English
18
4.1.3 Scan channels by frequency range
1.
Please click and select "
Bandwidth
".
2.
You can select the bandwidth you want to scan. (" 6 ", or " 7 ", or " 8 ", or " 7, 8 ", or " 6,
7, 8 ")
3.
Please fill in initial frequency you want to scan under "
Min Freq.
" field.
4.
Please fill in ending frequency you want to scan under "
Max Freq.
" field.
5.
Please click and select "Auto Scan?to begin the channel scanning.
6.
After the channel scanning is finished, you can click and select "
OK
" to save and exit,
or select "
Save As
” to store the new channel table and exit.
4.2 Image Capture
This configuration page allows you to set the frames per capture and interval between each
frame.
Total Frames:
You can use left button of mouse to change the frames you want to capture
each time.
Interval:
You can use left button of mouse to change the capture interval (seconds) of each
frame.
Default:
You can click this button to restore the default value stored on the system.
Frame Capture Path:
You need to specify your location to store the captured frames in this
field.
If the settings of image capture are correct, you can click "
OK
" to save your setting and exit.
Or click "
Cancel
button to give up all the changes you made and exit.
