SYSTEM USAGE
1. Push the power switch on the subwoofer to the ON position to turn on the
power. The system will be in the stand-by mode and the RED LED indicator
will be lit.
2. The operating range of the remote control is 7 meters and up to 45 degrees
from the remote control to the front panel. Push the POWER ON/OFF
button on the remote control to turn on the system, when the LED indicator
is red, this means the power is on.
3. When the sound source is a DVD, AC-3 or PC 5.1, push the AC-3 button on
the remote control. The LED function indicator will be red and this indicates
that the system is in the AC-3 sound source input status.
4. When the sound source is a PC or CD, press the AUX button on the remote
control. The LED function indicator will be green which means the system
is in the AUX sound source input status. (This operation also can be done
by pressing the AC-3/AUX function key on the subwoofer front panel)
5. Press the function key “” to adjust the master volume. You can
also adjust the volume of the front speakers, rear surround speakers and
subwoofer by pressing the button of “+” or “-“.
6. RESET: Press “RESET” to return the speaker volume to default.
7. The function key “MUTE” is for shutting off the sound. Press this key and
the sound will shut off immediately. Press the key again to bring it back to
the original status.
NOTICE:
1. Do not put this device in the rain or a wet place, or it may cause a fire or
electric shock. “This product is for indoors use only.”
2. Adjust the volume to a proper level when in use. Otherwise, it may damage
your hearing or this device.
3. Shut down the power and unplug the system when it will not be used for a
long period of time.
4. Turn off the master power before installing the system to avoid misuse or
damage to this system or other devices.
ENGLISH
4