ENGLISH
2
ID Channel Setting
The channel ID is factory preset. The green LED (data
transmission indicator) will be lit constantly when the wireless
device is in normal operation. In case your wireless devices do
not work, please reset the ID channel by:
1.
Press the connect button on the receiver and the light will
be blinking for connection.
2.
Press the connect buttons of the keyboard and mouse
within 20 seconds.
3.
To confirm the connection of the wireless devices, the LED
light will be lit constantly for approximately three seconds
and will turn off after being connected.
Charger and charging usage
1.
The charger device can be used to recharge both AA and
AAA batteries;
two batteries
must be charged
simultaneously.
2.
Make sure that only rechargeable batteries (NiMH~
Nickle-Metal-Hydride) batteries are used and placed in the
correct position.
3.
For safety, the charger features a
recognition function
for
alkaline batteries placed and/or when the batteries are not
placed in the correct polarity direction; resulting in
charger’s LED Light to
blink between green and red
to
indicate a warning.
