![background image](http://html1.mh-extra.com/html/genius/lioguard-m-box-advanced/lioguard-m-box-advanced_instruction-manual_2213241014.webp)
14
4.
At Advanced: Cover the introduced hazardous goods with the
PyroBubbles® supplied, filling them up to the upper edge of
the container. If you want to place several layers of hazardous
goods into the transport container, you need to make sure
that there is a sufficient padding thickness between the indi-
vidual layers.
Caution
Only when the transport container is completely filled with
PyroBubbles® is an adequate level of protection ensured.
4.
At Premium: Enclose the dangerous goods with additional PE
filler pads. If you want to place several layers of dangerous
goods into the transport container, you need to make sure
that there is a sufficient padding thickness between the indi-
vidual layers. Also, place the dangerous goods into the con-
tainer in such a way that a minimum distance of 4
cm is en-
sured to all sides of the insert walls and 10
cm to the con-
tainer lid.
5.
At Premium: Fill the transport container up to the top edge
with PE filler pads.
Attention
Only when the transport container is completely filled with
PE filler pads, is an adequate level of protection ensured.
6.
Close the transport container (see section
Fehler! Verweis-
quelle konnte nicht gefunden werden.
).
Attention
Make sure that you do not damage the PE filler pads with the
lid holder.
4 cm
4 cm
4
cm
4
cm