7
3.1.2
Storage instructions
PyroBubbles® must be stored in a dry location.
The transport container should be stored at temperatures b5°C and +25°C, protected
from direct solar radiation and in a dry area, to maintain the sealing properties of the rubber
seal in accordance with DIN 7716 standard (Rubber products: Requirements for storage, clean-
ing and maintenance).
3.2
Transport
3.2.1
Safety instructions
Danger
Danger of poisoning due to toxic, partially odourless gases
Injuries ranging from severe to fatal
In the event that the cell or battery suffers a thermal runaway, leave the danger
zone as quickly as possible.
Danger
Risk of explosion due to explosive gases
Injuries ranging from severe to fatal
In the event that the cell or battery suffers a thermal runaway, avoid ignition
sources. If possible, provide sufficient ventilation.
Warning
Risk of injury from falling parts
Injuries ranging from severe to fatal
When moving transport containers, use only suitable lifting gear attached to the
designated lifting points. No person must be allowed to linger within the working
area of the of the lifting gear.
3.2.2
Transport instructions
During transport, observe the relevant legal regulations. This also applies to any additional
markings or labels.
Make sure that all the locking eyelets of the toggle catches are properly hooked onto the lock-
ing hooks, and that all toggle catches are closed.
Lift the transport container only by means of the guides provided, and use only appropriate
lifting gear.
When transporting dangerous goods, the space above the container must be kept free, so that
in the event of a thermal runaway the reaction gases have adequate space to vent via the
safety valves.
