32
3.2 Wi-Fi connecting
1.
Press the Power button to switch on the Device.
2.
Press the Wi-Fi button to activate the device’s wireless
broadcast.
3.
Using your mobile device’s Wi-Fi, connect to the cameras
wireless broadcast signal by searching for the unique SSID
from the list, e.g. LifeShotFHD300XXXXXX (if the last 2 digits
are the same as the last 2 digits of your password, your device
corresponds).
4.
Connect to the Wi-Fi and input the Wi-Fi password
5.
The Wi-Fi password will be displayed on the LCM screen. Enter
the 4 numeral/letter shown from your LCM display twice. e.g. if
LCM display shows “1234”, the Wi-Fi password will be
“12341234”.
6.
For iOS / Android Users:
Using the mobile device [Settings]
→
[Wi-Fi]
→
[Select device
ID no.: LifeShotFHD300XXXXXX]
→
[Enter the password]
→
[Connecting].
7.
Open the LIFE Shot App
to begin using the camera
through your mobile device. The LCM display will show
, indicating the connection has been established.
Note:
1. Make sure the Wi-Fi function of the equipment is activated and the
mobile device is receiving Wi-Fi signal before executing the LIFE
Shot App, or the App will be exited.
2. The Wi-Fi connection has a maximum range of 10m from the
equipment without any obstructions in between the devices.
3. When there is no Wi-Fi activity on the camera for 3 minutes, the
Wi-Fi function will automatically disable and you will need to
re-enable the Wi-Fi signal on the camera.
4. We suggest that you should set the correct date and time for your
mobile device before using the equipment, so that the recorded
