42
•
SMTP
(Simple Mail Transfer Protocol) is a protocol for
sending e-mail messages between servers you need to
input the mail server address in this field.
•
Sender e-mail
is the e-mail address of the user who will
send the e-mail.
•
Receiver e-mail
is the e-mail address of the user who
will receive the e-mail.
•
User Name:
Enter the user name in this field.
•
Password:
Enter the user password in this field to login
receiver’s mail server
Time Schedule:
To set schedule to send e-mail.
“Interval”:
Define time interval between two images sent.
Manual Operation:
When you chick the E-mail image button in view image screen, it
will start to e-mail image.
“Interval”:
To define time interval between two images sent.
Save/Cancel:
After making sure all settings in the System are correct, click the
“Save”
button to store the settings for the Wireless IPCam
SECURE300. You can alternatively click the
“Cancel”
button to
restore all settings to the values last saved to or retrieved from the
Wireless IPCam SECURE300.
Summary of Contents for IPCAM 300
