ENGLISH
Genius Advanced Technologies
www.geniuscaralarm.com
3
Before Using
1. Power ON / OFF
If the tracker is powered OFF, connect the power wire to the car battery
can make the tracker power on automatically, also press and hold the
ON/OFF Button and release after the GREEN LED is ON, the tracker
will power on.
If the tracker is powered ON, press and hold the SOS button until the
GREEN LED flash quickly, release the button, and press the SOS but-
ton 3 times quickly, then the GREEN LED will turn off and the tracker
will power OFF.
2. Install SIM card
Remove the battery cover according the following diagram, and remove
the battery, the SIM card socket can be seen, Push the SIM card cover
up to release the socket (to “OPEN” direction in the following diagram),
and put the SIM card into socket (Pay attention to that the SIM card
metal contact pin need face down to the socket), cover the SIM card
metal cover and push the cover to “LOCK” direction to lock the SIM
card. And then put the battery in and lock the battery cover.
Genius GPS
LED
Indicator
ON/OFF
Button
Wires
SOS Button
SOS
Button